12 263
Finns i lager
(Bara 1)
- Leverans inom 3-5 arbetsdagar
- Fri frakt
- Trustpilot omdöme 4.7/5
- Enkel returnering
Ställ en fråga om denna produkt
Maila kundservice30 dagars Nöjd Kund-Garanti
30 dagars Nöjd Kund-Garanti
Denna produkt har 30 dagars nöjdhetsgaranti. Härmed kan du prova produkten i 30 dagar efter köpet. Inte nöjd? Då kan du returnera produkten och du får pengarna tillbaka (minus returkostnad) även om produkten har använts.
För- & Nackdelar
För- & Nackdelar
- The Scope S3 wheels have a low weight of 1540 grams, which makes them perfect for your rides in the hills and mountains. The low 30 mm rim also catches little lateral wind.
- The S3 wheels are excellent value for money! In terms of quality, they are right up there with Zipp wheels.
- Thanks to the pre-installed tubeless rim tape, making the wheels tubeless is an easy job. Tubeless riding increases comfort and puncture resistance, and decreases rolling resistance.
- With Scope wheels, you get a lot of security: an extended warranty period of 3 years and a lifetime crash replacement programme!
- Scope wheels are developed in the Netherlands in collaboration with Schwalbe, SKF and the Universities of Technology at Eindhoven and Delft, so their high quality is guaranteed.
- The Scope S3 wheels do not come with wheel bags.
Specifikation
Specifikation
Märke
|
Scope |
Hjulset | |
1595 gram | |
Fälgmaterial
|
Kolfiber |
Fälghöjd
|
30 mm |
Fälgbredd (intern)
|
19 mm |
Fälgbredd
|
26 mm |
Vikbart däck / Tubeless | |
Lättvikta klättringshjul / Aerodynamiska hjul |
Beskrivning
Beskrivning
The Scope S3 road bike wheels for disc brakes are a great choice if you are looking for a wheel set for the hills or high mountains. The shallow 30 mm rim means you will rarely be bothered by wind, and the extremely low weight of 1540 grams makes climbing almost effortless!
The Scope S3 wheelset is equipped with durable SKF bearings with a good seal and low rolling resistance. In addition, the S4 wheels are equipped with Scope's new, highly durable 3-pawl hubs. The wheels are built on aerodynamic 30mm deep rims with an external rim width of 26mm. The pre-mounted tubeless rim tape and tubeless valves allow the S3 wheels to be run tubeless. The wide rim in combination with a wider tubeless outer tyre provides greater comfort, lower rolling resistance and increased puncture resistance. The fact that there is no weight limit for the Scope S3 wheels simply proves they are super sturdy. Scope underlines this with a 3-year warranty and a lifetime crash replacement program.
Scope wheels are built almost like a "system". Each part is connected to - and developed with - the complete wheel in mind. To create high stiffness, Scope optimised the flange. After all, a wide flange accounts for almost 60% of the total lateral stiffness of a wheelset. Scope has succeeded in keeping the spoke tension constant despite the use of a wide flange. The wide flange, optimal spoke tension and stiff wide carbon rim result in a very high lateral stiffness; 47-52 Nm/mm, an industry benchmark! All your energy is converted into speed.
Aerodynamic and tubeless
By compiling data collected over more than a year, Scope has been able to determine the extent to which the wind affects a wheelset. "Computational Fluid Dynamics" was then used to develop the 26mm U-shape rim to minimise the influence of air resistance and crosswind from all angles. The result; outperforming other brands. The rim profile of the rim was optimized for tubeless tyres in collaboration with TU Eindhoven and Schwalbe, while remaining compatible with all wire and folding tyres. The internal rim width is 19 mm and fits perfectly with a 25 mm tyre.
Lightweight
The Faculty of Aerospace Engineering at TU Delft helped Scope to optimise the carbon structure for strength and stiffness. Scope was able to add extra reinforcement to the rim where the spoke nipples are, while saving weight between the spoke nipples; this was achieved using Local Reinforcement Technology. Together with Delft University of Technology, Scope has developed this technology further, reducing the weight of all racing and mountain bike rims without compromising stiffness and strength.
Extreme durability
Durability is the key factor in a hub's longevity. To protect the bearings from dirt and water, Scope has developed its own system. The end caps of the shafts completely seal the hubs in addition to the seals that seal the bearings themselves. Scope uses high-quality industrial SKF bearings. All in all, this helps to optimise the durability of the hubs.
3 Year Warranty
Quality is Scope's number one priority. After registering your wheelset on their website within 30 days of purchase, you activate the 3-year warranty. When registering your wheelset it is necessary to mention the serial number. This can be found on the registration card provided, the wheel box or on the flange of the rear hub.
Lifetime Crash Replacement Programme
Despite its high quality, a Scope wheelset cannot always withstand the consequences of a severe crash. This is why Scope offers a crash replacement programme in addition to the 3-year guarantee. With this programme, Scope gives you the chance to replace the wheel after a crash at a reduced rate.
- Tubeless rim tape (pre-installed)
- Tubeless valves (pre-installed)
- 10 speed cassette spacer
- Warranty registration card
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• The body for 12 speed Sram XDR has to be bought separately.
Visa mer
Visa mindre
The Scope S3 wheelset is equipped with durable SKF bearings with a good seal and low rolling resistance. In addition, the S4 wheels are equipped with Scope's new, highly durable 3-pawl hubs. The wheels are built on aerodynamic 30mm deep rims with an external rim width of 26mm. The pre-mounted tubeless rim tape and tubeless valves allow the S3 wheels to be run tubeless. The wide rim in combination with a wider tubeless outer tyre provides greater comfort, lower rolling resistance and increased puncture resistance. The fact that there is no weight limit for the Scope S3 wheels simply proves they are super sturdy. Scope underlines this with a 3-year warranty and a lifetime crash replacement program.
Tekniker
High lateral stiffnessScope wheels are built almost like a "system". Each part is connected to - and developed with - the complete wheel in mind. To create high stiffness, Scope optimised the flange. After all, a wide flange accounts for almost 60% of the total lateral stiffness of a wheelset. Scope has succeeded in keeping the spoke tension constant despite the use of a wide flange. The wide flange, optimal spoke tension and stiff wide carbon rim result in a very high lateral stiffness; 47-52 Nm/mm, an industry benchmark! All your energy is converted into speed.
Aerodynamic and tubeless
By compiling data collected over more than a year, Scope has been able to determine the extent to which the wind affects a wheelset. "Computational Fluid Dynamics" was then used to develop the 26mm U-shape rim to minimise the influence of air resistance and crosswind from all angles. The result; outperforming other brands. The rim profile of the rim was optimized for tubeless tyres in collaboration with TU Eindhoven and Schwalbe, while remaining compatible with all wire and folding tyres. The internal rim width is 19 mm and fits perfectly with a 25 mm tyre.
Lightweight
The Faculty of Aerospace Engineering at TU Delft helped Scope to optimise the carbon structure for strength and stiffness. Scope was able to add extra reinforcement to the rim where the spoke nipples are, while saving weight between the spoke nipples; this was achieved using Local Reinforcement Technology. Together with Delft University of Technology, Scope has developed this technology further, reducing the weight of all racing and mountain bike rims without compromising stiffness and strength.
Extreme durability
Durability is the key factor in a hub's longevity. To protect the bearings from dirt and water, Scope has developed its own system. The end caps of the shafts completely seal the hubs in addition to the seals that seal the bearings themselves. Scope uses high-quality industrial SKF bearings. All in all, this helps to optimise the durability of the hubs.
3 Year Warranty
Quality is Scope's number one priority. After registering your wheelset on their website within 30 days of purchase, you activate the 3-year warranty. When registering your wheelset it is necessary to mention the serial number. This can be found on the registration card provided, the wheel box or on the flange of the rear hub.
Lifetime Crash Replacement Programme
Despite its high quality, a Scope wheelset cannot always withstand the consequences of a severe crash. This is why Scope offers a crash replacement programme in addition to the 3-year guarantee. With this programme, Scope gives you the chance to replace the wheel after a crash at a reduced rate.
Kompatibilitet
• To be used with Shimano and/or Sram 9/10/11 speed groupsets.Leverans innehåller:
- Scope S3 wheelset- Tubeless rim tape (pre-installed)
- Tubeless valves (pre-installed)
- 10 speed cassette spacer
- Warranty registration card
Montering
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Användningstips
• Pay attention to the direction of travel when mounting your tyres.• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• The body for 12 speed Sram XDR has to be bought separately.
Läs mer på vår blogg
Vad är skillnaden mellan olika sorters landsvägshjul? [Köpguide landsvägshjul]
Läs merRecensioner
Recensioner
5 / 5
Vackra hjul med ett utmärkt förhållande mellan pris och prestanda
- Herman 28 januari 2022
Lättviktshjul med lättgående nav. Den låga vikten gör cykeln mycket responsiv och direkt på styret.
För- & Nackdelar
Holländsk produkt
Låg vikt
Ser väldigt bra ut
Nej
Automatiskt översatt
5 / 5
Fantastiskt hjulpar, rekommenderas starkt.
- Carl 28 januari 2022
Hjulen går vackert lätta och montering av slanglösa däck var en bit kaka, bara pumpad upp med vanlig pump utan boost! Ser väldigt bra ut i min Gun Gray Giant.
För- & Nackdelar
Bra kvalitet till bra pris
Enkel montering utan slangar
Körs mycket lätt
Snabb leverans av Mantel
Vacker finish
Nej
Automatiskt översatt
5
Carl, 28 januari 2022
Fantastiskt hjulpar, rekommenderas starkt.
Hjulen går vackert lätta och montering av slanglösa däck var en bit kaka, bara pumpad upp med vanlig pump utan boost! Ser väldigt bra ut i min Gun Gray Giant.
-
Bra kvalitet till bra pris
-
Enkel montering utan slangar
-
Körs mycket lätt
-
Nej
Automatiskt översatt
Relaterade produkter
Relaterade produkter
Scope S3 Disc | Shimano Ultegra R8170 C60 Disc | Shimano Ultegra R8170 C50 Disc | Ubique R50C Disc | |
2 recensioner | 1 recension | 9 recensioner | 12 recensioner | |
Typ av hjul | Hjulset | Hjulset / Framhjul / Bakhjul | Hjulset / Bakhjul | Hjulset |
Vikt enligt tillverkare | 1595 gram | 1642 gram | 1562 gram | |
Fälgmaterial | Kolfiber | Kolfiber | Kolfiber | Kolfiber |
Fälghöjd | 30 mm | 60 mm | 50 mm | 50 mm |
Fälgbredd (intern) | 19 mm | 21 mm | 21 mm | 21 mm |
Fälgbredd | 26 mm | 28 mm | 28 mm | 28 mm |
12 263 | Från 7 126 | Från 6 478 | Från 3 858 | |
Denna produkt | Visa produkt | Visa produkt | Visa produkt |
Alla specifikationer
Allmänt
Hjul & Däck
Komponenter
Mått
Ingår i leveransen
Hjulväskor ingår
Nej